




Audio-Technica AE2500 - Dual-Element Cardioid Instrument Microphone
- - Dual-element condenser plus dynamic kick drum mic
- - Cardioid polar pattern on both elements
- - Condenser 20 to 17,000 Hz, dynamic 30 to 10,000 Hz
- - 80 Hz HPF and 10 dB pad on condenser
- - 5-pin XLR to dual 3-pin XLR cable included
Combina bien con

Audio-Technica AE2500 - Dual-Element Cardioid Instrument Microphone
Detalles del producto
Características del producto
The Audio-Technica AE2500 combines a condenser and a dynamic element in a single cardioid housing, designed primarily for kick drum. The dynamic element captures the attack of the beater while the condenser picks up the round tone of the shell, and both are positioned in a fixed phase relationship that is very hard to achieve with two separate microphones.
The microphone uses a 5-pin XLR connector and ships with a 5 m dual-output cable that splits the two elements to two standard 3-pin XLR outputs for separate channels.
Key Features:
- Condenser and dynamic elements in one cardioid housing
- Elements positioned in a fixed phase relationship
- Dynamic element for beater attack, condenser for shell tone
- Condenser element has 80 Hz high-pass filter and 10 dB pad
- Condenser handles 148 dB SPL (158 dB SPL with pad)
- Includes 5 m cable with two 3-pin XLRM outputs
- Robust Artist Elite construction for touring
Especificaciones del producto
Audio-Technica AE2500 — Dual-Element Cardioid Instrument Microphone
- Elements: Condenser, dynamic
- Polar Pattern: Cardioid
- Frequency Response: 20 – 17,000 Hz (condenser); 30 – 10,000 Hz (dynamic)
- Low Frequency Roll-Off: 80 Hz, 12 dB/octave (condenser)
- Open Circuit Sensitivity: –51 dB (2.8 mV) re 1V at 1 Pa (condenser); –54 dB (1.9 mV) re 1V at 1 Pa (dynamic)
- Impedance: 100 ohms (condenser); 600 ohms (dynamic)
- Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL with 10 dB pad (nominal) (condenser)
- Dynamic Range: 124 dB, 1 kHz at Max SPL (condenser)
- Signal-to-Noise Ratio: 70 dB, 1 kHz at 1 Pa (condenser)
- Phantom Power Requirements: 11 – 52V DC, 3 mA typical (condenser)
- Switches: High-pass filter; 10 dB pad (nominal) (condenser only)
- Output Connector: Integral 5-pin XLRM-type
- Cable: 5 m (16.5′) dual shielded 8-conductor cable, 5-pin XLRF-type to two 3-pin XLRM-type
- Weight: 390 g (13.8 oz), less cable
- Dimensions: 165.0 mm (6.50″) long, 55.0 mm (2.17″) maximum diameter
- MPN: AE2500 · UPC: 4961310088538
Qué incluye
Documentación
Si tiene alguna pregunta, siempre puede ponerse en contacto con nosotros. Le responderemos lo antes posible, en un plazo de 24 horas los días laborables.
-
Información de envío
Utilice este texto para responder a las preguntas de sus clientes con el mayor detalle posible.
-
Atención al Cliente
Utilice este texto para responder a las preguntas de sus clientes con el mayor detalle posible.
-
Preguntas frecuentes
Utilice este texto para responder a las preguntas de sus clientes con el mayor detalle posible.
-
Contáctenos
Utilice este texto para responder a las preguntas de sus clientes con el mayor detalle posible.
