

Audio-Technica AT-LP70X - Fully Automatic Belt-Drive Turntable (Black/Grey)
- - Fully automatic belt-drive turntable, 33-1/3 and 45 RPM
- - Switchable phono/line preamp, dual RCA output
- - AT-VM95C conical cartridge, VM95 stylus upgradeable
- - J-shaped tonearm, die-cast aluminum platter
- - Wow and flutter below 0.25% (WTD)
Combina bien con

Audio-Technica AT-LP70X - Fully Automatic Belt-Drive Turntable (Black/Grey)
Detalles del producto
Características del producto
The Audio-Technica AT-LP70X is a fully automatic belt-drive turntable built for listeners new to vinyl. One button starts playback and the tonearm returns on its own at the end of the side, with no tonearm balancing or cartridge installation needed.
It plays 33-1/3 and 45 RPM records and has a switchable phono/line preamp, so it connects to powered speakers, receivers or amplifiers with or without a phono input. The AT-VM95C integral Dual Moving Magnet cartridge accepts any VM95 Series replacement stylus for future upgrades. This listing is the black/grey finish.
Key Features:
- Fully automatic belt-drive operation at 33-1/3 and 45 RPM
- Switchable built-in phono preamp (phono/line output)
- Dual RCA output with detachable RCA cable and ground terminal
- AT-VM95C cartridge with 0.6 mil bonded conical stylus; upgradeable to other VM95 Series styli
- J-shaped tonearm designed to minimize tracking error
- Die-cast aluminum platter with felt mat
- Three-piece chassis to dampen resonance; external AC adapter
- Removable hinged dust cover and 45 RPM adapter included
Especificaciones del producto
Audio-Technica AT-LP70X — Fully Automatic Belt-Drive Turntable (Black/Grey)
- Operation: Fully automatic
- Motor / Drive: DC motor, belt drive
- Speeds: 33-1/3, 45 RPM
- Platter: Die-cast aluminum
- Wow and Flutter: <0.25% (WTD)
- Signal-to-Noise Ratio: >55 dB
- Output Level: Phono: 4.0 mV nominal; Line: 252 mV nominal (1 kHz, 5 cm/sec)
- Phono Pre-Amp Gain: 36 dB nominal, RIAA equalized
- Tonearm: J-shaped; 220 mm (8.7″) effective length; 18 mm overhang; tracking error <2.0°
- Cartridge: AT-VM95C Dual Moving Magnet (not removable); 0.6 mil bonded conical stylus; aluminum pipe cantilever
- Replacement Stylus: AT-VMN95C (sold separately)
- Power: AC adapter 100 – 240 V AC, 50/60 Hz in; 12 V DC, 0.5 A out; 1.5 W consumption
- Dimensions: 400 mm × 330 mm × 110 mm (16″ × 13″ × 4.3″) W × D × H
- Weight: Approx. 2.9 kg (6.4 lbs)
- MPN: AT-LP70X-BG · UPC: 4961310162191
Qué incluye
Documentación
Si tiene alguna pregunta, siempre puede ponerse en contacto con nosotros. Le responderemos lo antes posible, en un plazo de 24 horas los días laborables.
-
Información de envío
Utilice este texto para responder a las preguntas de sus clientes con el mayor detalle posible.
-
Atención al Cliente
Utilice este texto para responder a las preguntas de sus clientes con el mayor detalle posible.
-
Preguntas frecuentes
Utilice este texto para responder a las preguntas de sus clientes con el mayor detalle posible.
-
Contáctenos
Utilice este texto para responder a las preguntas de sus clientes con el mayor detalle posible.
