Audio-Technica AT-LP70XBT - Fully Automatic Bluetooth Belt-Drive Turntable (Black/Bronze)

The Audio-Technica AT-LP70XBT is a fully automatic belt-drive turntable that streams to Bluetooth speakers and headphones as well as connecting by cable. Press a button and the tonearm cues, plays and returns on its own, with no tonearm balancing or cartridge installation needed, making it a straightforward first turntable.

It plays 33-1/3 and 45 RPM records, has a switchable phono/line preamp for wired systems, and uses the AT-VM95C integral Dual Moving Magnet cartridge whose stylus can be upgraded to any VM95 Series replacement stylus. A J-shaped tonearm, three-piece chassis for vibration damping and an external AC adapter round out the design. This listing is the black/bronze finish.

Key Features:

• Fully automatic belt-drive operation at 33-1/3 and 45 RPM
• Bluetooth 5.2 with Qualcomm aptX Adaptive, aptX and SBC codecs
• Switchable built-in phono preamp (phono/line output) with detachable RCA cable
• AT-VM95C cartridge with 0.6 mil bonded conical stylus; upgradeable to other VM95 Series styli
• J-shaped tonearm with tonearm lock
• Die-cast aluminum platter with felt mat
• Three-piece chassis to dampen vibration; external AC adapter
• Removable hinged dust cover and 45 RPM adapter included

Audio-Technica AT-LP70XBT — Fully Automatic Bluetooth Belt-Drive Turntable (Black/Bronze)

• Operation: Fully automatic
• Motor / Drive: DC motor, belt drive
• Speeds: 33-1/3, 45 RPM
• Platter: Die-cast aluminum
• Wow and Flutter: <0.25% (WTD)
• Signal-to-Noise Ratio: >55 dB
• Output Level: Phono: 4.0 mV nominal; Line: 252 mV nominal (1 kHz, 5 cm/sec)
• Phono Pre-Amp Gain: 36 dB nominal, RIAA equalized
• Bluetooth: Version 5.2, A2DP; Qualcomm aptX Adaptive, aptX, SBC; approx. 10 m (33′) line of sight
• Tonearm: J-shaped; 220 mm (8.7″) effective length; 18 mm overhang; tracking error <2.0°
• Cartridge: AT-VM95C Dual Moving Magnet (not removable); 0.6 mil bonded conical stylus; aluminum pipe cantilever
• Replacement Stylus: AT-VMN95C (sold separately)
• Power: AC adapter 100 – 240 V AC, 50/60 Hz in; 12 V DC, 0.5 A out; 1.6 W consumption
• Dimensions: 400 mm × 330 mm × 110 mm (16″ × 13″ × 4.3″) W × D × H
• Weight: Approx. 2.9 kg (6.4 lbs)
• MPN: AT-LP70XBT-BZ  ·  UPC: 4961310162368

- AT-LP70XBT turntable body (black/bronze)
- Platter
- Drive belt
- Dust cover
- Felt mat
- Dust cover hinges
- 45 RPM adapter
- AC adapter (approx. 1.5 m / 4.9')
- RCA audio cable (approx. 1.0 m / 3.3')
- Quick Start Guide
- Caution Guide

Safety Data Sheet (PDF)