Detalles del producto

Características del producto

The Audio-Technica AT-VM95SH is the shibata model of the VM95 Series, a dual moving magnet stereo cartridge with a 2.7 x 0.26 mil nude Shibata stylus on an aluminum pipe cantilever. It mounts in standard half-inch headshells using the threaded inserts in its housing.

Every VM95 Series cartridge shares the same body, so the stylus can later be swapped for any AT-VMN95 replacement stylus to change tip profile.

Key Features:

  • VM dual moving magnet design
  • 2.7 x 0.26 mil nude Shibata stylus
  • Aluminum pipe cantilever
  • Frequency response 20 – 25,000 Hz, 3.5 mV output
  • Tracking force 1.8 – 2.2 g (2.0 g standard)
  • Replacement stylus: AT-VMN95SH; accepts any AT-VMN95 stylus

Especificaciones del producto

Audio-Technica AT-VM95SH — Shibata Dual Moving Magnet Stereo Cartridge

  • Type: VM (dual moving magnet) stereo cartridge
  • Frequency Response: 20 – 25,000 Hz
  • Output Voltage: 3.5 mV (1 kHz, 5 cm/sec)
  • Channel Separation: 23 dB (1 kHz)
  • Output Channel Balance: 1.5 dB (1 kHz)
  • Tracking Force: 1.8 – 2.2 g (2.0 g standard)
  • Vertical Tracking Angle: 23°
  • Static / Dynamic Compliance: 20 × 10-6 cm/dyne / 10 × 10-6 cm/dyne (100 Hz)
  • DC Resistance / Coil Impedance / Inductance: 485 Ω / 3.3 kΩ (1 kHz) / 550 mH (1 kHz)
  • Recommended Load: 47 kΩ, 100 – 200 pF
  • Stylus: Nude Shibata, 2.7 × 0.26 mil
  • Cantilever: Aluminum pipe
  • Cartridge Weight: 6.1 g (0.22 oz)
  • Cartridge Dimensions: 17.2 mm H × 18.9 mm W × 28.3 mm D
  • Replacement Stylus: AT-VMN95SH (sold separately); all AT-VMN95 styli interchangeable
  • MPN: AT-VM95SH  ·  UPC: 4961310145989

Qué incluye

- AT-VM95SH cartridge
- Cartridge installation screws 11.0 mm (x2) and 8.0 mm (x2)
- Washers (x2)
- Non-magnetic screwdriver

Documentación