Audio-Technica AT2035 - Large-Diaphragm Cardioid Condenser Studio Microphone

The Audio-Technica AT2035 is a large-diaphragm, side-address cardioid condenser microphone for home and project studios, giving smooth, natural sound with low noise. It handles high SPL with a wide dynamic range, suiting vocals, acoustic instruments and amps.

A switchable 80 Hz high-pass filter and 10 dB pad add flexibility, and a custom shock mount is included for isolation.

Key Features:

• Large diaphragm for smooth, natural sound and low noise
• Low 12 dB SPL self-noise, 136 dB dynamic range
• Handles 148 dB SPL (158 dB SPL with pad)
• Switchable 80 Hz high-pass filter and 10 dB pad
• Cardioid pattern reduces pickup from sides and rear
• AT8458 shock mount included

Audio-Technica AT2035 — Large-Diaphragm Cardioid Condenser Studio Microphone

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern: Cardioid
• Frequency Response: 20 – 20,000 Hz
• Low Frequency Roll-Off: 80 Hz, 12 dB/octave
• Open Circuit Sensitivity: –33 dB (22.4 mV) re 1V at 1 Pa
• Impedance: 120 ohms
• Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL with 10 dB pad (nominal)
• Noise: 12 dB SPL
• Dynamic Range: 136 dB, 1 kHz at Max SPL
• Signal-to-Noise Ratio: 82 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 11 – 52V DC, 3.8 mA typical
• Switches: Flat, roll-off; 10 dB pad (nominal)
• Output Connector: Integral 3-pin XLRM-type
• Weight: 403 g (14.2 oz)
• Dimensions: 170.0 mm (6.69″) long, 52.0 mm (2.05″) maximum body diameter
• MPN: AT2035  ·  UPC: 4961310101756

- AT2035 microphone
- AT8458 shock mount for 5/8"-27 threaded stands
- 5/8"-27 to 3/8"-16 threaded adapter
- Soft protective pouch

Safety Data Sheet (PDF)