Audio-Technica AT4022 - End-Address Omnidirectional Condenser Microphone

The Audio-Technica AT4022 is a small-diaphragm, end-address omnidirectional condenser microphone from the 40 Series for studio and live use. Its flat, extended response, low self-noise and strong low-frequency reproduction make it a fit for room ambience, ensembles, acoustic instruments and distant miking.

A switchable 80 Hz high-pass filter and 10 dB pad are built in, and a stand clamp, windscreen and carrying case are included.

Key Features:

• Omnidirectional pattern for maximum ambient pickup
• Flat, extended frequency response with strong low end
• Low 13 dB SPL self-noise, suited to digital recording
• Handles 146 dB SPL (156 dB SPL with pad)
• Switchable 80 Hz high-pass filter and 10 dB pad
• Low-mass element for good transient response
• Rugged construction for studio and live use

Audio-Technica AT4022 — End-Address Omnidirectional Condenser Microphone

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern: Omnidirectional
• Frequency Response: 20 – 20,000 Hz
• Low Frequency Roll-Off: 80 Hz, 12 dB/octave
• Open Circuit Sensitivity: –34 dB (19.9 mV) re 1V at 1 Pa
• Impedance: 250 ohms
• Maximum Input Sound Level: 146 dB SPL, 1 kHz at 1% T.H.D.; 156 dB SPL with 10 dB pad (nominal)
• Noise: 13 dB SPL
• Dynamic Range: 133 dB, 1 kHz at Max SPL
• Signal-to-Noise Ratio: 81 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 48V DC, 3.0 mA typical
• Switches: Flat, roll-off; 10 dB pad
• Output Connector: Integral 3-pin XLRM-type
• Weight: 124 g (4.4 oz)
• Dimensions: 144.0 mm (5.67″) long, 21.0 mm (0.83″) maximum body diameter
• MPN: AT4022  ·  UPC: 4961310103019

- AT4022 microphone
- AT8405a stand clamp for 5/8"-27 threaded stands
- Windscreen
- Protective carrying case