





Audio-Technica AT4050ST - Mid-Side Stereo Condenser Microphone
- - Mid-Side stereo condenser, side-address
- - Modes: 90° stereo, 127° stereo, discrete M-S
- - Frequency response: 20 – 18,000 Hz
- - 80 Hz high-pass filter and 10 dB pad
- - 5-pin XLR output, cable splits to two XLRs
Combina bien con

Audio-Technica AT4050ST - Mid-Side Stereo Condenser Microphone
Detalles del producto
Características del producto
The Audio-Technica AT4050ST is a side-address stereo condenser microphone with independent cardioid (mid) and figure-of-eight (side) elements. It can output discrete Mid-Side signals for adjusting stereo width after recording, or matrix them internally to left-right stereo in a 90° narrow or 127° wide mode.
It is designed for recording, broadcast and sound reinforcement. Gold diaphragms, transformerless circuitry, an 80 Hz high-pass filter and a 10 dB pad are built in. A 5 m stereo cable splits the 5-pin output to two 3-pin XLR connectors.
Key Features:
- Independent cardioid (mid) and figure-of-eight (side) elements
- Switchable 90° stereo, 127° stereo and discrete M-S modes
- Gold diaphragms and transformerless circuitry
- Handles 149 dB SPL, 159 dB SPL with the 10 dB pad
- Switchable 80 Hz high-pass filter (12 dB/octave)
- Integral 5-pin XLRM-type output with 5 m dual-XLR stereo cable
- AT8449a shock mount included; requires 48V phantom power
Especificaciones del producto
Audio-Technica AT4050ST — Mid-Side Stereo Condenser Microphone
- Element: Externally polarized (DC bias) condenser; independent cardioid and figure-of-eight elements
- Polar Patterns: Cardioid, figure-of-eight
- Frequency Response: 20 – 18,000 Hz
- Low-Frequency Roll-Off: 80 Hz, 12 dB/octave
- Open-Circuit Sensitivity: Stereo 90°: –42 dB (7.9 mV); Stereo 127°: –41 dB (8.9 mV); Mid: –36 dB (15.8 mV); Side: –36 dB (15.8 mV); re 1V at 1 Pa
- Impedance: 50 ohms
- Maximum Input Sound Level: Mid and Side: 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL with 10 dB pad (nominal)
- Noise: Stereo 90°: 25 dB SPL; Stereo 127°: 16 dB SPL; Mid: 15 dB SPL; Side: 17 dB SPL
- Dynamic Range: Mid: 134 dB; Side: 132 dB, 1 kHz at Max SPL
- Signal-to-Noise Ratio: Stereo 90°: 69 dB; Stereo 127°: 78 dB; Mid: 79 dB; Side: 77 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 48V DC, 6.4 mA typical (total, both channels)
- Switches: 90°, 127°, M-S modes; flat, roll-off; 10 dB pad (nominal)
- Output Connector: Integral 5-pin XLRM-type
- Weight: 517 g (18.2 oz)
- Dimensions: 193.0 mm (7.60″) long, 53.4 mm (2.10″) maximum body diameter
- MPN: AT4050ST · UPC: 4961310137779
Qué incluye
Documentación
Si tiene alguna pregunta, siempre puede ponerse en contacto con nosotros. Le responderemos lo antes posible, en un plazo de 24 horas los días laborables.
-
Información de envío
Utilice este texto para responder a las preguntas de sus clientes con el mayor detalle posible.
-
Atención al Cliente
Utilice este texto para responder a las preguntas de sus clientes con el mayor detalle posible.
-
Preguntas frecuentes
Utilice este texto para responder a las preguntas de sus clientes con el mayor detalle posible.
-
Contáctenos
Utilice este texto para responder a las preguntas de sus clientes con el mayor detalle posible.
