Audio-Technica AT875R - Short Shotgun Condenser Microphone

The Audio-Technica AT875R is a line + gradient condenser shotgun microphone just 175 mm (6.89") long, built for video production and broadcast (ENG/EFP) work. Its short, light body suits compact cameras and boom poles, while the narrow acceptance angle reaches sources at a distance.

The response is tailored to reduce camera and handling noise, and it rejects sound well from the sides and rear. It runs on 11 – 52 V phantom power and outputs through an integral XLR connector.

Key Features:

• Line + gradient polar pattern with narrow acceptance angle for long-distance pickup
• Only 175 mm (6.89") long and 80 g, suited to compact cameras
• Tailored response reduces camera and handling noise
• Strong rejection of sound from the sides and rear
• Requires 11 – 52 V DC phantom power
• Integral 3-pin XLRM-type output
• Windscreen and AT8405a stand clamp included

Audio-Technica AT875R — Short Shotgun Condenser Microphone

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern: Line + gradient
• Frequency Response: 90 – 20,000 Hz
• Open Circuit Sensitivity: –30 dB (31.6 mV) re 1V at 1 Pa
• Impedance: 100 ohms
• Maximum Input Sound Level: 127 dB SPL, 1 kHz at 1% T.H.D.
• Dynamic Range: 107 dB, 1 kHz at Max SPL
• Signal-to-Noise Ratio: 74 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 11 – 52 V DC, 2 mA typical
• Output Connector: Integral 3-pin XLRM-type
• Weight: 80 g (2.8 oz)
• Dimensions: 175.0 mm (6.89″) long, 21.0 mm (0.83″) diameter
• MPN: AT875R  ·  UPC: 4961310098353

- AT875R microphone
- AT8405a stand clamp for 5/8"-27 threaded stands
- 5/8"-27 to 3/8"-16 threaded adapter
- Windscreen
- Two O-rings
- Soft protective pouch

Safety Data Sheet (PDF)