





Audio-Technica ATM350D - Cardioid Condenser Instrument Microphone with Drum Mount
- - Cardioid condenser clip-on instrument microphone system
- - Frequency response: 40 - 20,000 Hz
- - AT8491D drum mount attaches to drum lug
- - 5" UniMount gooseneck plus AT8543 power module
- - Switchable 80 Hz low-cut, XLRM output
Combina bien con

Audio-Technica ATM350D - Cardioid Condenser Instrument Microphone with Drum Mount
Detalles del producto
Características del producto
The Audio-Technica ATM350D pairs the ATM350a miniature cardioid condenser microphone with a drum mounting system, giving drummers a discreet, secure way to mic snare, toms and percussion. The mic handles very high sound pressure levels with a clear, balanced response.
The AT8491D mount clamps to a drum lug and can be adjusted without loosening it, and the 5-inch gooseneck can be set vertically or horizontally. The in-line AT8543 power module supplies the XLR output and a switchable 80 Hz high-pass filter.
Key Features:
- Low-profile ATM350a cardioid condenser capsule for minimal visibility
- Clear, balanced response even at high sound pressure levels (159 dB SPL max)
- Cardioid pattern reduces pickup from the sides and rear
- Spring-loaded AT8491D drum mount clamps to a drum lug and allows tuning without removal
- Rigid UniMount 5" gooseneck holds position during energetic playing
- AT8543 power module with switchable 80 Hz high-pass filter
- Optional UE-H hypercardioid and UE-O omnidirectional elements available separately
- Includes AT8468 violin mount and protective carrying case
Especificaciones del producto
Audio-Technica ATM350D — Cardioid Condenser Instrument Microphone with Drum Mount
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 40 – 20,000 Hz
- Low Frequency Roll-Off: 80 Hz, 12 dB/octave
- Open Circuit Sensitivity: –49 dB (3.5 mV) re 1V at 1 Pa
- Impedance: 200 ohms
- Maximum Input Sound Level: 159 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range: 130 dB, 1 kHz at Max SPL
- Signal-to-Noise Ratio: 65 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 11 – 52V DC, 3.5 mA typical
- Switches: Flat, roll-off (on AT8543 power module)
- Cable: 4.0 m (13.1′) permanently attached to microphone, 3.2 mm (0.13″) diameter, 2-conductor shielded, HIROSE HR10-type connector
- Output Connector: Power module: Integral 3-pin XLRM-type
- Weight: Microphone: 14.5 g (0.5 oz); Power module: 90 g (3.2 oz)
- Dimensions: Microphone: 37.8 mm (1.49″) long, 12.2 mm (0.48″) maximum body diameter; Power module: 92 mm (3.62″) long, 18.9 mm (0.74″) diameter
- MPN: ATM350D · UPC: 4961310136765
Qué incluye
Documentación
Si tiene alguna pregunta, siempre puede ponerse en contacto con nosotros. Le responderemos lo antes posible, en un plazo de 24 horas los días laborables.
-
Información de envío
Utilice este texto para responder a las preguntas de sus clientes con el mayor detalle posible.
-
Atención al Cliente
Utilice este texto para responder a las preguntas de sus clientes con el mayor detalle posible.
-
Preguntas frecuentes
Utilice este texto para responder a las preguntas de sus clientes con el mayor detalle posible.
-
Contáctenos
Utilice este texto para responder a las preguntas de sus clientes con el mayor detalle posible.
