





Audio-Technica ATM350S - Cardioid Condenser Instrument Microphone with Surface Mount
- - Cardioid condenser clip-on instrument microphone system
- - Frequency response: 40 - 20,000 Hz
- - AT8491S surface mount for accordion and more
- - 5" UniMount gooseneck plus AT8543 power module
- - Switchable 80 Hz low-cut, XLRM output
Combina bien con

Audio-Technica ATM350S - Cardioid Condenser Instrument Microphone with Surface Mount
Detalles del producto
Características del producto
The Audio-Technica ATM350S pairs the ATM350a miniature cardioid condenser microphone with a surface mounting system for accordions and other instruments that are hard to mic with clamps. The mic stays in place while the performer moves.
The AT8491S surface mount and AT8475 surface mounting kit allow permanent or temporary attachment, and the 5-inch gooseneck sets the capsule position. The AT8543 power module provides the XLR output and a switchable 80 Hz high-pass filter.
Key Features:
- Low-profile ATM350a cardioid condenser capsule for minimal visibility
- Clear, balanced response even at high sound pressure levels (159 dB SPL max)
- Cardioid pattern reduces pickup from the sides and rear
- AT8491S surface mount and AT8475 kit attach permanently or temporarily
- Rigid UniMount 5" gooseneck holds position during energetic playing
- AT8543 power module with switchable 80 Hz high-pass filter
- Optional UE-H hypercardioid and UE-O omnidirectional elements available separately
- Includes AT8468 violin mount and protective carrying case
Especificaciones del producto
Audio-Technica ATM350S — Cardioid Condenser Instrument Microphone with Surface Mount
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 40 – 20,000 Hz
- Low Frequency Roll-Off: 80 Hz, 12 dB/octave
- Open Circuit Sensitivity: –49 dB (3.5 mV) re 1V at 1 Pa
- Impedance: 200 ohms
- Maximum Input Sound Level: 159 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range: 130 dB, 1 kHz at Max SPL
- Signal-to-Noise Ratio: 65 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 11 – 52V DC, 3.5 mA typical
- Switches: Flat, roll-off (on AT8543 power module)
- Cable: 4.0 m (13.1′) permanently attached to microphone, 3.2 mm (0.13″) diameter, 2-conductor shielded, HIROSE HR10-type connector
- Output Connector: Power module: Integral 3-pin XLRM-type
- Weight: Microphone: 14.5 g (0.5 oz); Power module: 90 g (3.2 oz)
- Dimensions: Microphone: 37.8 mm (1.49″) long, 12.2 mm (0.48″) maximum body diameter; Power module: 92 mm (3.62″) long, 18.9 mm (0.74″) diameter
- MPN: ATM350S · UPC: 4961310149406
Qué incluye
Documentación
Si tiene alguna pregunta, siempre puede ponerse en contacto con nosotros. Le responderemos lo antes posible, en un plazo de 24 horas los días laborables.
-
Información de envío
Utilice este texto para responder a las preguntas de sus clientes con el mayor detalle posible.
-
Atención al Cliente
Utilice este texto para responder a las preguntas de sus clientes con el mayor detalle posible.
-
Preguntas frecuentes
Utilice este texto para responder a las preguntas de sus clientes con el mayor detalle posible.
-
Contáctenos
Utilice este texto para responder a las preguntas de sus clientes con el mayor detalle posible.
