Detalles del producto

Características del producto

The Audio-Technica U851RbO is an omnidirectional condenser boundary microphone designed for surface mounting in sound reinforcement, recording, broadcast and conferencing. Its heavy die-cast body and low-profile, low-reflectance finish keep it stable and discreet on tables and floors.

A rotating output connector lets the cable exit from the rear or bottom, and threaded inserts on the underside allow permanent screw mounting. It runs on phantom power with no external power module.

Key Features:

  • Omnidirectional condenser element placed close to the boundary to reduce phase distortion
  • Switchable 80 Hz low-cut filter
  • Rotating output connector for rear or bottom cable exit
  • RF shielding reduces radio-frequency interference
  • Heavy die-cast body and non-slip silicone pads reduce vibration pickup
  • Interchangeable elements available: UE-C cardioid, UE-H hypercardioid
  • Threaded inserts for screw mounting

Especificaciones del producto

Audio-Technica U851RbO — Omnidirectional Condenser Boundary Microphone

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Omnidirectional
  • Frequency Response: 20 – 20,000 Hz
  • Low Frequency Roll-Off: 80 Hz, 18 dB/octave
  • Open Circuit Sensitivity: −31 dB (28.2 mV) (0 dB = 1V/Pa, 1 kHz)
  • Impedance: 50 ohms
  • Maximum Input Sound Level: 132 dB SPL (1 kHz at 1% THD)
  • Dynamic Range: 111 dB (1 kHz at Max SPL)
  • Signal-to-Noise Ratio: 73 dB (1 kHz at 1 Pa, A-weighted)
  • Phantom Power Requirements: 11 – 52V DC, 4.4 mA
  • Switches: Low cut: on/off
  • Output Connector: TB3M-type (microphone); 3-pin XLRM-type (cable)
  • Dimensions: 23 mm (0.91″) H × 83.9 mm (3.3″) W × 108 mm (4.25″) D
  • Weight: 253 g (8.9 oz)
  • MPN: U851RBO  ·  UPC: 4961310146702

Qué incluye

- Audio-Technica U851RbO omnidirectional condenser boundary microphone
- 7.6 m (24.9') black microphone cable (TA3F to XLRM)
- Pouch

Documentación