Detalles del producto

Características del producto

The Audio-Technica U857QL is a UniPoint cardioid condenser gooseneck microphone with an 18.94″ (481 mm) gooseneck and a 3-pin XLRM connector built into its base, so it plugs straight into a panel- or desk-mounted XLRF jack. Its integral power module runs on phantom power, with no external module needed.

A low-profile element with a uniform 120° cardioid pattern gives strong off-axis rejection for maximum gain before feedback, and UniGuard shielding rejects RF interference. The small-diameter gooseneck is easy to position and holds its shape. Suited to lecterns, conference rooms, houses of worship and broadcast.

Key Features:

  • Quick-mount design with integral 3-pin XLRM connector at the base
  • 18.94″ (481 mm) small-diameter gooseneck with virtually no memory
  • Cardioid pattern, 120° acceptance angle
  • UniGuard RFI-shielding technology
  • UniSteep 80 Hz low-frequency filter (flat / roll-off switch)
  • Phantom power only, integral power module
  • Accepts optional interchangeable elements; shock mount and windscreen included

Especificaciones del producto

Audio-Technica U857QL — Cardioid Condenser Quick-Mount Gooseneck Microphone

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 30 – 20,000 Hz
  • Low Frequency Roll-Off: 80 Hz, 18 dB/octave
  • Open Circuit Sensitivity: –39 dB (11.2 mV) re 1V at 1 Pa
  • Impedance: 250 ohms
  • Maximum Input Sound Level: 139 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 115 dB, 1 kHz at Max SPL
  • Signal-to-Noise Ratio: 70 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 11 – 52V DC, 2 mA typical
  • Switch: Flat, roll-off
  • Output Connector: Integral 3-pin XLRM-type
  • Weight: 150 g (5.3 oz)
  • Dimensions: 481.0 mm (18.94″) long, 12.2 mm (0.48″) head diameter, 18.9 mm (0.74″) base diameter
  • MPN: U857QL  ·  UPC: 042005140831

Qué incluye

- U857QL quick-mount gooseneck microphone
- AT8662 shock mount
- AT8153 two-stage foam windscreen

Documentación