Colorkey Vortyx Faze 1200 - 1200W Faze Machine with DMX and RF Remote

Colorkey Vortyx Faze 1200 - 1200W Faze Machine with DMX and RF Remote

The Vortyx Faze 1200 is a 1200W faze machine that produces an even, haze-like atmosphere from fog fluid. It's for DJs, bands and venues that want beams and washes to show up in the air without a separate hazer.

Haze Look from Fog Fluid

Rated at 3,000 CFM, the Faze 1200 spreads a smooth, even layer through the room, closer to a traditional hazer than a fog blast. It heats up in about 2 minutes, and its 1.5L tank lasts up to 11 hours of continuous output at 2.2ml per minute, so one fill covers a full night.

Control Options

Run it from the included RF remote, set continuous or timed output, or patch it into your lighting rig over 3-pin DMX. An LED display handles setup, and low fluid protection guards the machine when the tank runs dry.

Mount It or Set It Down

The metal-framed housing hangs from truss with the included bracket and safety anchor point, or sits on built-in feet on the floor or a table. The output direction can be adjusted to aim the haze where you need it.

Key Features:

• 1200W heater with 3,000 CFM output
• Haze-like atmosphere from fog fluid
• About 2-minute heat-up
• Up to 11 hours from a 1.5L tank
• DMX, RF remote, continuous and timed output
• Truss bracket with safety anchor or floor standing
• Low fluid protection

What's Included:

• 1x Colorkey Vortyx Faze 1200
• 1x RF remote
• 1x Hanging bracket with safety anchor point

Specifications:

• Heating Element: 1200W
• Machine Type: Faze
• Fluid Type: Water-based fog fluid
• Output: 3,000 CFM
• Fluid Consumption: 2.2ml/min
• Tank Capacity: 1.5L
• Continuous Output Time: 11 hours
• Heating Time: 2 minutes
• Control Options: Continuous Output, Timed Output, DMX, RF Remote (included)
• DMX: 3-pin in/out
• Housing: Metal frame
• Mounting Options: Bracket with safety anchor, floor standing
• Power Consumption: 220W
• Voltage: 110-120V (US)
• Dimensions: 12.6" x 5.5" x 10.6" (32 x 14 x 27 cm)
• Weight: 10.6 lb (4.8 kg)

Heating Element: 1200W
Machine Type: Faze
Fluid Type: Water-based fog fluid
Output: 3,000 CFM
Fluid Consumption: 2.2ml/min
Tank Capacity: 1.5L
Continuous Output Time: 11 hours
Heating Time: 2 minutes
Control Options: Continuous Output, Timed Output, DMX, RF Remote (included)
DMX: 3-pin in/out
Housing: Metal frame
Mounting Options: Bracket with safety anchor, floor standing
Power Consumption: 220W
Voltage: 110-120V (US)
Dimensions: 12.6" x 5.5" x 10.6" (32 x 14 x 27 cm)
Weight: 10.6 lb (4.8 kg)

1x Colorkey Vortyx Faze 1200 1x RF remote 1x Hanging bracket with safety anchor point