Electro-Voice PA2450L - Dual Channel Class AB Power Amplifier, 2x450W at 4 Ohms

The Electro-Voice PA2450L is a rackmount 450W 2-channel power amplifier offering versatile configurability for 4-/8-Ohm setups in schools, houses of worship, retail spaces, offices, and more. This amplifier has a simple, easy-to-use interface with the power switch and indicator LEDs on the front panel, while the stepped level controls and switches for the selectable 50/300 Hz high-pass filter and dual/parallel/bridged mode are on the rear. Euroblock input and output connectors are utilized for quick and easy setup.

Comprehensive protection circuitry protects your amplifier from damage caused by overheating, overloads, and short-circuit issues. The output has a delayed connection at power-up to prevent damage to your speakers. Variable-speed fans and a flow-through-chassis design direct airflow from front to rear, and keep the amplifier cool and running smoothly. Integrated rack ears allow direct mounting of the 2 RU enclosure in a standard 19" equipment rack.

• Rugged rack-mountable 2 RU housing with integrated rack ears
• Choose to operate in dual mono, parallel, or bridged mono mode
• 450W rated output power with low noise and distortion
• Dual Euroblock Phoenix-type input connectors
• 4-pin Euroblock output connector for connection to 4-/8-Ohm speakers
• Rear-panel volume controls
• Selectable high-pass filter at 50/300 Hz
• Front-to-rear airflow for reliable operation
• Protection circuitry for overheating, audio limiting, delayed output connection at power-up, and peak current limiting
• Front-panel LEDs for power, signal, limit, and protect
• Voltage selector for international use

Form Factor: Rackmount Number of Amplifier Channels: 2 Load Impedance/Voltage Support: 4 / 8 Ohms Power Rating per Channel: 2x 450 W at 4 Ohms; 2x 225 W at 8 Ohms Frequency Response: 10 Hz to 40 kHz -1 dB Damping Factor: > 250 at 4 Ohms SNR/Noise: 104 dBA SNR THD/Distortion: <= 0.1% THD (1 kHz); <= 0.1% IMD (DIM 30/SMPTE) Crosstalk: < -75 dB (1 kHz) DSP: No EQ & Filters: High-Pass Filter (50/300 Hz selectable) Analog Audio I/O: 1x Block 4-Pin Output; 2x Block 3-Pin Input Phantom Power: No Input Power: 120 to 230 VAC, 60/50 Hz AC Power Connector: 1x IEC Power Consumption: 530 W (1/8 Power at 4 Ohms) Display: Single-LED Indicators Only Rackmount Size: 2 U Cooling: Fan (Variable Speed) Dimensions: 19 x 15.9 x 3.5 in (48.3 x 40.5 x 8.8 cm) Weight: 36.3 lb (16.5 kg)

Electro-Voice PA2450L Rackmount 2-Channel 450W Power Amplifier (4/8 Ohms)
Power Cable
4 x Attachable Feet
Screwlock Connectors for All Inputs and Outputs
Limited 3-Year Manufacturer Warranty