ProX XT-CRANK22FT-400 Heavy Duty 22 Ft. High Truss Crank Lighting Stand 400 Lbs. Capacity Includes T-Adapter Truss Mount

Featuring the ProX XT-CRANK22FT-400 Heavy Duty 22 Ft. High Truss Crank Lighting Stand, a purpose-built crank stand system designed for production professionals who need serious lift capacity without compromising stability or safety. With a rated vertical load capacity of 400 lbs. and a maximum reach of 22 ft., this is not a stand you grow into. It is a stand you reach for when the job demands it. Whether you are running a large mobile DJ setup, a live event, or a production that calls for truss at real height, ProX CRANK22FT-400 gives you the power to get your rig in the air cleanly, confidently, and with full control every time.

Heavy Duty Construction The entire stand is built around all-metal components, combining steel and aluminum construction to deliver the kind of structural integrity that holds up across demanding production schedules. This is not a lightweight stand that happens to have a crank. Every part of it is rated and built to carry real loads at real heights.

Crank Lift Mechanism A smooth, heavy-duty cranking mechanism handles all the heavy lifting for you. Turning the winch handle clockwise raises the tower, and counter-clockwise lowers it, giving you precise control over height at any point during setup or strike. No direct lifting of heavy loads required.

Stable Base Design The base opens to a 7 ft. diameter (83.85"), giving you a wide, planted footprint that keeps the stand firmly grounded under load. The independently adjustable leg braces and nylon guided leg sliders let you fine-tune stability across different floor surfaces and event environments.

Integrated Casters Built-in casters make repositioning the stand significantly easier during setup, before loads are applied. Once the stand is in place and loaded, all safety mechanisms including safety pins and knobs should be locked before any lifting begins.

T-Adapter Compatibility ProX CRANK22FT-400 is designed to work with the XT-TADAPTER400, which accepts a 1.5" diameter pole. This allows the stand to interface directly with compatible truss sections and truss mounting hardware, making it a natural fit within the broader ProX Truss system.

Portable and Storable Despite its heavy-duty build and large footprint when deployed, the stand folds down to a compact form factor for transport. Closed base dimensions come in at 18.25" x 18.25", and the stand ships at 78"H x 20"W x 20"L.

Minimum Height The stand's minimum operating height begins at 86", giving you a solid starting point before cranking up to full extension.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XT-CRANK22FT-400 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

SAFETY INSTRUCTIONS
_{^{To avoid problems a competent person should inspect all rigging hardware, stands and equipment before each use and periodically do a major inspection for signs of wear, abuse, and general adequacy, as well as perform any manufacturer recommended preventive maintenance on schedule.  Observe all warnings and usage instructions in the full manual.  Use at your own risk.
Basic Usage:
1.    Ensure that the stand is positioned on a hard stable surface, in a suitable location, on firm ground and clear of overhead obstacles.
2.    Stabilize legs before lifting the tower or any load.
3.    When outdoors, secure the tower with braces or cables, in the case of wind.
4.    Check the cable, it should not show damaged or flattened areas nor broken threads.
Using the Winch:
1.    For Lifting the tower, turn the winch handle clockwise.
2.    For lowering the tower, turn the winch handle counter-clockwise.
Safety Notes:
1.    Loading on truss and stands should comply with rated weights.
2.    Lock all the safety mechanisms (safety pins, knobs)
3.    Loads must be centered & balanced on each lifting unit.
4.    Safety chains must be installed on each item attached to the unit.
5.    Leave a safety perimeter with a radius 5ft greater than the maximum height of the stands during lifting and lowering of loads.
6.    During transport, close all the sections and lock the lifting carriage.
7.    Do not attempt to move the stand when loaded or in an extended position.
Service Notes:
1.    Servicing and repairs must be made by qualified persons.
2.    Cable, pulleys, and telescopic masts must be inspected before each use. Any damaged cable must be replaced immediately.
3.    Annual inspection by an authorized technician is suggested.}}

• 400 lb. vertical load capacity for heavy production truss and lighting rigs
• 22 ft. maximum height reach for large-scale event applications
• Smooth, heavy-duty crank winch mechanism eliminates direct lifting and lowering of heavy loads
• Heavy-duty all-metal construction with sturdy steel and aluminum components throughout
• 7 ft. base diameter (83.85") provides a wide, stable footprint under load
• Independently adjustable leg braces for fine-tuned stability across different surfaces
• Nylon guided leg sliders for smooth, controlled leg adjustment
• Integrated casters for easy repositioning during setup
• Minimum operating height of 86"
• Compatible with XT-TADAPTER400 T-Adapter truss mount (1.5" diameter pole)
• Folds to a compact 18.25" x 18.25" closed base for transport and storage
• Product weight: 160 lbs.
• Can be used in conjunction with another same-rated stand for dual-stand truss configurations
• Designed for mobile DJ, live band, and production event applications

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.