Audio-Technica AT-LP70X
Audio-Technica AT-LP70X

Vendor:Audio-Technica

Audio-Technica AT-LP70X - Fully Automatic Belt-Drive Turntable (Black/Grey)

$269.00
  • - Fully automatic belt-drive turntable, 33-1/3 and 45 RPM

  • - Switchable phono/line preamp, dual RCA output

  • - AT-VM95C conical cartridge, VM95 stylus upgradeable

  • - J-shaped tonearm, die-cast aluminum platter

  • - Wow and flutter below 0.25% (WTD)

In-Stock!

Will be shipped in 1-3 Business Days.

Accessories and Warranties

Product Details

Product Features

The Audio-Technica AT-LP70X is a fully automatic belt-drive turntable built for listeners new to vinyl. One button starts playback and the tonearm returns on its own at the end of the side, with no tonearm balancing or cartridge installation needed.

It plays 33-1/3 and 45 RPM records and has a switchable phono/line preamp, so it connects to powered speakers, receivers or amplifiers with or without a phono input. The AT-VM95C integral Dual Moving Magnet cartridge accepts any VM95 Series replacement stylus for future upgrades. This listing is the black/grey finish.

Key Features:

  • Fully automatic belt-drive operation at 33-1/3 and 45 RPM
  • Switchable built-in phono preamp (phono/line output)
  • Dual RCA output with detachable RCA cable and ground terminal
  • AT-VM95C cartridge with 0.6 mil bonded conical stylus; upgradeable to other VM95 Series styli
  • J-shaped tonearm designed to minimize tracking error
  • Die-cast aluminum platter with felt mat
  • Three-piece chassis to dampen resonance; external AC adapter
  • Removable hinged dust cover and 45 RPM adapter included

Product Specifications

Audio-Technica AT-LP70X — Fully Automatic Belt-Drive Turntable (Black/Grey)

  • Operation: Fully automatic
  • Motor / Drive: DC motor, belt drive
  • Speeds: 33-1/3, 45 RPM
  • Platter: Die-cast aluminum
  • Wow and Flutter: <0.25% (WTD)
  • Signal-to-Noise Ratio: >55 dB
  • Output Level: Phono: 4.0 mV nominal; Line: 252 mV nominal (1 kHz, 5 cm/sec)
  • Phono Pre-Amp Gain: 36 dB nominal, RIAA equalized
  • Tonearm: J-shaped; 220 mm (8.7″) effective length; 18 mm overhang; tracking error <2.0°
  • Cartridge: AT-VM95C Dual Moving Magnet (not removable); 0.6 mil bonded conical stylus; aluminum pipe cantilever
  • Replacement Stylus: AT-VMN95C (sold separately)
  • Power: AC adapter 100 – 240 V AC, 50/60 Hz in; 12 V DC, 0.5 A out; 1.5 W consumption
  • Dimensions: 400 mm × 330 mm × 110 mm (16″ × 13″ × 4.3″) W × D × H
  • Weight: Approx. 2.9 kg (6.4 lbs)
  • MPN: AT-LP70X-BG  ·  UPC: 4961310162191

What's included

- AT-LP70X turntable body (black/grey)
- Platter
- Drive belt
- Dust cover
- Felt mat
- Dust cover hinges
- 45 RPM adapter
- AC adapter (approx. 1.5 m / 4.9')
- RCA audio cable (approx. 1.0 m / 3.3')
- Quick Start Guide
- Caution Guide

Documentation

Safety Data Sheet (PDF)