Audio-Technica AT-LPW40WN - Fully Manual Belt-Drive Turntable (Walnut)

The Audio-Technica AT-LPW40WN is a fully manual belt-drive turntable with a walnut finish, a straight carbon-fiber tonearm and a DC servo motor with Active Speed Stabilization. It is aimed at listeners who want hands-on control and audiophile-grade parts in a clean wooden design.

It plays 33-1/3 and 45 RPM records and has a switchable built-in phono preamp, so it connects to receivers and powered speakers with or without a phono input. It ships with an AT-VM95E Dual Moving Magnet cartridge on an AT-HS4 headshell; the stylus can be swapped for any VM95 Series replacement stylus.

Key Features:

• Fully manual belt-drive operation at 33-1/3 and 45 RPM
• DC servo motor with Active Speed Stabilization
• Static-balanced straight carbon tonearm, 223.6 mm effective length
• AT-VM95E cartridge (0.3 x 0.7 mil bonded elliptical stylus) on AT-HS4 headshell
• Switchable built-in phono preamp (phono/line output)
• Die-cast aluminum platter
• Wow and flutter below 0.15% WRMS; S/N above 60 dB
• Dust cover, 45 RPM adapter and RCA cable included

Audio-Technica AT-LPW40WN — Fully Manual Belt-Drive Turntable (Walnut)

• Operation: Fully manual
• Motor / Drive: DC servo motor with Active Speed Stabilization, belt drive
• Speeds: 33-1/3, 45 RPM
• Platter: Aluminum die-cast
• Wow and Flutter: <0.15% WRMS (33 RPM) @ 3 kHz
• Signal-to-Noise Ratio: >60 dB
• Output Level: Phono: 4.0 mV nominal; Line: 200 mV nominal (1 kHz, 5 cm/sec)
• Phono Pre-Amp Gain: 35 dB nominal, RIAA equalized
• Tonearm: Static-balanced straight carbon; 223.6 mm effective length; 18.6 mm overhang; tracking error <2.0°
• Tracking Force Range / Cartridge Weight: 0 – 3.0 g / 12 – 17 g (with headshell)
• Cartridge: AT-VM95E VM type, 0.3 × 0.7 mil bonded elliptical stylus, on AT-HS4 headshell
• Replacement Stylus: AT-VMN95E (sold separately)
• Power: 100 – 240 V, 50/60 Hz, 0.5 A max; AC adapter 12 V, 0.5 A; 1.1 W working (110 V)
• Dimensions: 420 mm W × 340 mm D × 116.9 mm H
• Weight: 4.72 kg (10.40 lbs), without dust cover
• MPN: AT-LPW40WN  ·  UPC: 4961310146160

- AT-LPW40WN turntable body (walnut)
- Platter
- Drive belt
- Turntable mat
- Counterweight
- AT-HS4 headshell with AT-VM95E stereo cartridge
- Dust cover and dust cover hinges
- 45 RPM adapter
- AC adapter (approx. 1.5 m)
- RCA audio cable (approx. 1.0 m)
- Quick Start Guide
- Caution Guide

Safety Data Sheet (PDF)