Product Details

Product Features

The Audio-Technica AT-OC9XSL is an OC9X series dual moving coil phono cartridge with a nude Special Line Contact stylus on a 0.28 mm nude boron cantilever. Independent PCOCC coils for each channel, arranged in a reverse-V layout, deliver strong channel separation and low distortion.

An aluminum body limits resonance, and a neodymium magnet strengthens the field in the coil gap. The pre-threaded body mounts on any half-inch headshell with two screws and no nuts. With 0.4 mV output it requires a phono stage or step-up with an MC input; the stylus is not field-replaceable.

Key Features:

  • Dual moving coil design with independent PCOCC coils per channel
  • Nude Special Line Contact stylus (1.5 × 0.28 mil) on 0.28 mm nude boron cantilever
  • Frequency response 20 – 50,000 Hz, 28 dB channel separation
  • Aluminum body to reduce unwanted resonance
  • Threaded body for nut-free half-inch mounting
  • Brass terminal pins

Product Specifications

Audio-Technica AT-OC9XSL — Dual Moving Coil Special Line Contact Cartridge

  • Type: Dual moving coil (MC)
  • Frequency Response: 20 – 50,000 Hz
  • Output Voltage: 0.4 mV (1 kHz, 5 cm/sec)
  • Channel Separation: 28 dB (1 kHz)
  • Output Channel Balance: 0.5 dB (1 kHz)
  • Vertical Tracking Force: 1.8 – 2.2 g (2.0 g standard)
  • Vertical Tracking Angle: 20°
  • Stylus: Nude rectangular shank Special Line Contact, 1.5 × 0.28 mil
  • Cantilever: 0.28 mm diameter nude boron
  • Static / Dynamic Compliance: 22 × 10-6 cm/dyne / 18 × 10-6 cm/dyne (100 Hz)
  • Coil Impedance / DC Resistance: 12 Ω (1 kHz) / 12 Ω
  • Recommended Load Impedance: Min. 100 Ω (with head amplifier)
  • Coil Wire / Body: PCOCC / Aluminum
  • Mounting: Half-inch, threaded body
  • Dimensions: 17.3 mm (0.68″) H × 16.8 mm (0.66″) W × 25.7 mm (1.01″) D
  • Weight: 7.6 g (0.3 oz)
  • MPN: AT-OC9XSL  ·  UPC: 4961310150402

What's included

- AT-OC9XSL dual moving coil cartridge
- Non-magnetic screwdriver
- Washers x 2
- Cartridge installation screws: 5 mm x 2, 8 mm x 2, 10 mm x 2, 12 mm x 2
- Plastic protector
- Brush