Audio-Technica AT4041SP - Pair of Cardioid Condenser Instrument Microphones

The Audio-Technica AT4041SP Studio Microphone Pack contains two AT4041 small-diaphragm cardioid condenser microphones, each with its own stand clamp and windscreen. It is a ready pair for stereo drum overheads, acoustic guitar, piano and other acoustic sources.

Each AT4041 is an end-address condenser with a smooth, extended response and a slight high-frequency rise, a transformerless output for high SPL handling, a switchable 80 Hz high-pass filter and a turned-brass housing.

Key Features:

• Two AT4041 cardioid condenser microphones in one pack
• Two AT8405a stand clamps and two AT8159 windscreens included
• Smooth, extended response with a slight high-frequency rise
• Low-mass diaphragm for improved transient response and reduced handling noise
• Transformerless circuitry for low distortion and high SPL handling
• Switchable 80 Hz high-pass filter on each microphone
• Integral 3-pin XLRM-type output; each requires 48V phantom power

Audio-Technica AT4041SP — Pair of Cardioid Condenser Instrument Microphones

• Contents: Two AT4041 microphones, two AT8405a stand clamps, two AT8159 windscreens
• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern: Cardioid
• Frequency Response: 20 – 20,000 Hz
• Low-Frequency Roll-Off: 80 Hz, 12 dB/octave
• Open-Circuit Sensitivity: –36 dB (15.8 mV) re 1V at 1 Pa
• Impedance: 100 ohms
• Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.
• Dynamic Range: 121 dB, 1 kHz at Max SPL
• Signal-to-Noise Ratio: 70 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 48V DC, 3.2 mA typical
• Switch: Flat, roll-off
• Output Connector: Integral 3-pin XLRM-type
• Weight: 120 g (4.2 oz) (each)
• Dimensions: 159.5 mm (6.28″) long, 21.0 mm (0.83″) diameter
• MPN: AT4041SP  ·  UPC: 042005153596

- 2x AT4041 Cardioid Condenser Microphone
- 2x AT8405a stand clamp for 5/8"-27 threaded stands
- 2x AT8159 windscreen
- Protective vinyl case

Safety Data Sheet (PDF)