Audio-Technica AT4047MP - Multi-Pattern Condenser Studio Microphone

The Audio-Technica AT4047MP is a large-diaphragm, side-address condenser microphone with three switchable polar patterns: cardioid, omnidirectional and figure-of-eight. It is designed for professional recording, broadcast and sound reinforcement.

Its dual-diaphragm capsule and precision-machined element keep each pattern accurate across the frequency range, and the housing is designed to limit internal reflections. A 10 dB pad and 80 Hz high-pass filter are built in, and an AT8449a/SV shock mount is included.

Key Features:

• Switchable cardioid, omnidirectional and figure-of-eight patterns
• Dual-diaphragm capsule for consistent pattern accuracy
• Handles 155 dB SPL, 165 dB SPL with the 10 dB pad
• 141 dB dynamic range with 14 dB SPL self-noise
• Switchable 80 Hz high-pass filter (12 dB/octave)
• AT8449a/SV shock mount included
• Integral 3-pin XLRM-type output; requires 48V phantom power

Audio-Technica AT4047MP — Multi-Pattern Condenser Studio Microphone

• Element: Externally polarized (DC bias) condenser
• Polar Patterns: Cardioid, omnidirectional, figure-of-eight
• Frequency Response: 20 – 18,000 Hz (all patterns)
• Low-Frequency Roll-Off: 80 Hz, 12 dB/octave
• Open-Circuit Sensitivity: –42 dB (7.9 mV) re 1V at 1 Pa
• Impedance: 100 ohms
• Maximum Input Sound Level: 155 dB SPL, 1 kHz at 1% T.H.D.; 165 dB SPL with 10 dB pad (nominal)
• Noise: 14 dB SPL
• Dynamic Range: 141 dB, 1 kHz at Max SPL
• Signal-to-Noise Ratio: 80 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 48V DC, 3.4 mA typical
• Switches: Polar selection; flat, roll-off; 10 dB pad (nominal)
• Output Connector: Integral 3-pin XLRM-type
• Weight: 524 g (18.5 oz)
• Dimensions: 188.0 mm (7.40″) long, 53.4 mm (2.10″) maximum body diameter
• MPN: AT4047MP  ·  UPC: 4961310137830

- AT4047MP Multi-pattern Condenser Microphone
- AT8449a/SV shock mount for 5/8"-27 threaded stands
- Microphone dust cover
- Protective carrying case

Safety Data Sheet (PDF)