





Audio-Technica ATM350GL - Cardioid Condenser Instrument Microphone with Guitar Mount
- - Cardioid condenser clip-on instrument microphone system
- - Frequency response: 40 - 20,000 Hz
- - AT8491G guitar mount for 90-135 mm bodies
- - 9" UniMount gooseneck plus AT8543 power module
- - Switchable 80 Hz low-cut, XLRM output
Accessories and Warranties

Audio-Technica ATM350GL - Cardioid Condenser Instrument Microphone with Guitar Mount
Product Details
Product Features
The Audio-Technica ATM350GL combines the ATM350a miniature cardioid condenser microphone with a guitar mounting system for acoustic guitar and other stringed instruments. The mic captures a clear, balanced sound and stays fixed to the instrument while the player moves.
The AT8491G mount clamps to instruments with a body depth of 90 to 135 mm, and the 9-inch gooseneck positions the capsule where it sounds best. The AT8543 power module provides the XLR output and a switchable 80 Hz high-pass filter.
Key Features:
- Low-profile ATM350a cardioid condenser capsule for minimal visibility
- Clear, balanced response even at high sound pressure levels (159 dB SPL max)
- Cardioid pattern reduces pickup from the sides and rear
- Thumbscrew-adjustable AT8491G guitar mount fits instrument bodies 90 – 135 mm deep
- Rigid UniMount 9" gooseneck holds position during energetic playing
- AT8543 power module with switchable 80 Hz high-pass filter
- Optional UE-H hypercardioid and UE-O omnidirectional elements available separately
- Includes AT8468 violin mount and protective carrying case
Product Specifications
Audio-Technica ATM350GL — Cardioid Condenser Instrument Microphone with Guitar Mount
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 40 – 20,000 Hz
- Low Frequency Roll-Off: 80 Hz, 12 dB/octave
- Open Circuit Sensitivity: –49 dB (3.5 mV) re 1V at 1 Pa
- Impedance: 200 ohms
- Maximum Input Sound Level: 159 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range: 130 dB, 1 kHz at Max SPL
- Signal-to-Noise Ratio: 65 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 11 – 52V DC, 3.5 mA typical
- Switches: Flat, roll-off (on AT8543 power module)
- Cable: 4.0 m (13.1′) permanently attached to microphone, 3.2 mm (0.13″) diameter, 2-conductor shielded, HIROSE HR10-type connector
- Output Connector: Power module: Integral 3-pin XLRM-type
- Weight: Microphone: 14.5 g (0.5 oz); Power module: 90 g (3.2 oz)
- Dimensions: Microphone: 37.8 mm (1.49″) long, 12.2 mm (0.48″) maximum body diameter; Power module: 92 mm (3.62″) long, 18.9 mm (0.74″) diameter
- MPN: ATM350GL · UPC: 4961310149376
What's included
Documentation
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
