The Audio-Technica ATM350W pairs the ATM350a miniature cardioid condenser microphone with a woodwind mounting system for clarinet, saxophone and other woodwinds. It captures a clear, balanced sound and stays with the instrument as the player moves. The AT8491W mount uses an adjustable hook-and-loop strap with a rubber pad and a rotating top, and is designed to minimize damping of the instrument. The AT8543 power module provides the XLR output and a switchable 80 Hz high-pass filter. Key Features: Low-profile ATM350a cardioid condenser capsule for minimal visibility Clear, balanced response even at high sound pressure levels (159 dB SPL max) Cardioid pattern reduces pickup from the sides and rear AT8491W woodwind mount attaches with a flexible strap and resists shock Rigid UniMount 5" gooseneck holds position during energetic playing AT8543 power module with switchable 80 Hz high-pass filter Optional UE-H hypercardioid and UE-O omnidirectional elements available separately Includes AT8468 violin mount and protective carrying case

https://docs.audio-technica.com/us/0305_0862_00_en_atm350a_om.pdf

Vendor:Audio-Technica

Audio-Technica ATM350W - Cardioid Condenser Instrument Microphone with Woodwind Mount

$379.00

Product variants

- Cardioid condenser clip-on instrument microphone system

- Frequency response: 40 - 20,000 Hz

- AT8491W strap mount fits any woodwind

- 5" UniMount gooseneck plus AT8543 power module

- Switchable 80 Hz low-cut, XLRM output

Out of Stock

On back order — reserve yours now and we'll ship it as soon as new stock arrives.

Accessories and Warranties

Audio-Technica ATM350W - Cardioid Condenser Instrument Microphone with Woodwind Mount

$379.00

Product Details

Product Features

The Audio-Technica ATM350W pairs the ATM350a miniature cardioid condenser microphone with a woodwind mounting system for clarinet, saxophone and other woodwinds. It captures a clear, balanced sound and stays with the instrument as the player moves.

The AT8491W mount uses an adjustable hook-and-loop strap with a rubber pad and a rotating top, and is designed to minimize damping of the instrument. The AT8543 power module provides the XLR output and a switchable 80 Hz high-pass filter.

Key Features:

Low-profile ATM350a cardioid condenser capsule for minimal visibility
Clear, balanced response even at high sound pressure levels (159 dB SPL max)
Cardioid pattern reduces pickup from the sides and rear
AT8491W woodwind mount attaches with a flexible strap and resists shock
Rigid UniMount 5" gooseneck holds position during energetic playing
AT8543 power module with switchable 80 Hz high-pass filter
Optional UE-H hypercardioid and UE-O omnidirectional elements available separately
Includes AT8468 violin mount and protective carrying case

Product Specifications

Audio-Technica ATM350W — Cardioid Condenser Instrument Microphone with Woodwind Mount

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 40 – 20,000 Hz
Low Frequency Roll-Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: –49 dB (3.5 mV) re 1V at 1 Pa
Impedance: 200 ohms
Maximum Input Sound Level: 159 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 130 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 65 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11 – 52V DC, 3.5 mA typical
Switches: Flat, roll-off (on AT8543 power module)
Cable: 4.0 m (13.1′) permanently attached to microphone, 3.2 mm (0.13″) diameter, 2-conductor shielded, HIROSE HR10-type connector
Output Connector: Power module: Integral 3-pin XLRM-type
Weight: Microphone: 14.5 g (0.5 oz); Power module: 90 g (3.2 oz)
Dimensions: Microphone: 37.8 mm (1.49″) long, 12.2 mm (0.48″) maximum body diameter; Power module: 92 mm (3.62″) long, 18.9 mm (0.74″) diameter
MPN: ATM350W · UPC: 4961310136758

What's included

- ATM350a cardioid condenser microphone
- AT8543 power module
- AT8491W UniMount woodwind mount
- AT8490 UniMount 5" gooseneck
- AT8468 violin mount (hook-and-loop fastener)
- Protective carrying case

Documentation

Safety Data Sheet (PDF)