Audio-Technica ATM710 - Cardioid Condenser Handheld Vocal Microphone

The Audio-Technica ATM710 is a cardioid condenser handheld vocal microphone from the Artist Series, bringing studio-quality condenser detail to live vocals. It excels in venues with controlled stage volume or in-ear monitoring, and also works in the studio.

A switchable 80 Hz high-pass filter and 10 dB pad are built in, and a multi-stage grille guards against plosives and sibilance. It requires 11 – 52V DC phantom power.

Key Features:

• Condenser design for studio-quality vocal reproduction
• Cardioid pattern rejects sound from the sides and rear
• Integral 80 Hz high-pass filter switch and 10 dB pad
• Anti-shock engineering for low handling noise
• Multi-stage grille for plosive and sibilance control
• Quiet-Flex stand clamp for silent positioning
• Gold-plated XLRM-type contacts and all-metal construction

Audio-Technica ATM710 — Cardioid Condenser Handheld Vocal Microphone

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern: Cardioid
• Frequency Response: 40 – 20,000 Hz
• Low Frequency Roll-Off: 80 Hz, 12 dB/octave
• Open Circuit Sensitivity: –40 dB (10.0 mV) re 1V at 1 Pa
• Impedance: 200 ohms
• Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL with 10 dB pad (nominal)
• Dynamic Range: 127 dB, 1 kHz at Max SPL
• Signal-to-Noise Ratio: 73 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 11 – 52V DC, 3.5 mA typical
• Switches: Flat, roll-off; 10 dB pad
• Output Connector: Integral 3-pin XLRM-type
• Weight: 274 g (9.7 oz)
• Dimensions: 179.0 mm (7.05″) long, 50.0 mm (1.97″) head diameter
• MPN: ATM710  ·  UPC: 4961310089054

- ATM710 cardioid condenser handheld microphone
- AT8470 Quiet-Flex stand clamp for 5/8"-27 threaded stands
- 5/8"-27 to 3/8"-16 threaded adapter
- Soft protective pouch

Safety Data Sheet (PDF)