Audio-Technica PRO35 - Cardioid Condenser Clip-On Instrument Microphone

The Audio-Technica PRO35 is a cardioid condenser clip-on microphone for saxophone, brass, toms and percussion. It handles high sound pressure levels and suits active stage use.

The included AT8418 UniMount clip positions the mic accurately while absorbing shock and protecting the element. A 1.8 m (6′) permanently attached cable connects to the included AT8538 in-line phantom power module, which provides the XLR output and a switchable 80 Hz roll-off.

Key Features:

• Cardioid condenser element isolates the intended instrument
• Handles up to 145 dB SPL
• AT8418 UniMount clip for positioning and shock resistance
• AT8538 in-line phantom power module with XLRM output
• Switchable 80 Hz low-frequency roll-off
• Lightweight 8 g microphone

Audio-Technica PRO35 — Cardioid Condenser Clip-On Instrument Microphone

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern: Cardioid
• Frequency Response: 50–15,000 Hz
• Low Frequency Roll-Off: 80 Hz, 18 dB/octave
• Open Circuit Sensitivity: −45 dB (5.6 mV) re 1V at 1 Pa
• Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.
• Dynamic Range: 115 dB, 1 kHz at Max SPL
• Signal-to-Noise Ratio: 64 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 11–52V DC, 2 mA typical
• Switches: Flat, roll-off
• Cable: 6.0′ (1.8 m), permanently attached, with TA3F-type connector
• Output Connector (Power Module): Integral 3-pin XLRM-type
• Weight: Microphone 0.3 oz (8 g); power module 2.9 oz (81 g)
• Dimensions: Microphone 0.98″ (25.0 mm) long, 0.40″ (10.2 mm) diameter; power module 3.66″ (92.9 mm) long, 0.74″ (18.9 mm) diameter
• MPN: PRO35  ·  UPC: 4961310084325

- Audio-Technica PRO35 microphone
- AT8418 UniMount microphone instrument mount
- AT8538 power module
- Soft protective pouch

Safety Data Sheet (PDF)