ProX XC-PEIEC - 18 AWG Power Adapter Cord Edison Female to IEC Male

Introducing the ProX XC-PEIEC, an 18 AWG power adapter cord with an Edison female connector on one end and an IEC C14 male connector on the other, built to solve one of the most common power problems on a stage, in a rack, or behind a booth. You have an IEC power cable running from your source, but the device you need to power has a standard Edison plug. Instead of hunting for another cable or rebuilding your run, you plug this 1 ft. adapter inline and keep working. It is small enough to live in a gig bag pocket or a rack drawer, and cheap enough to buy in quantity so every case, every rack, and every cart has one.

Edison Female to IEC C14 Male
The XC-PEIEC uses a 110V Edison female outlet on one end and an IEC C14 male plug on the other. Feed the C14 end from any standard IEC power cable and the Edison female outlet is ready to accept a standard Edison male plug. In practical terms, it converts IEC C14 style power cables into Edison style power cable extensions.

18 AWG Conductor
The cord is built with 18 AWG conductor, the same gauge used across a wide range of standard IEC power cables. It keeps the adapter consistent with the cabling already running through your rig instead of introducing a mismatch at the connection point.

Molded Strain Relief on Both Ends
Strain relief is molded directly into both connector bodies. This is the part of an adapter that usually fails first, since short cords get yanked, coiled tight, and pulled sideways out of rack panels. The molded transition spreads that stress across the connector body instead of concentrating it on the wire where it enters the plug.

1 Ft. Length That Stays Out of the Way
At 1 ft., the XC-PEIEC adds just enough reach to make the connection without creating another loop of slack to manage. Behind a rack, inside a workstation, or under a stage deck, extra cable length is a problem, not a feature. This one stays tight to the gear it serves.

Built for Racks, Booths, and Backline
Rack mounted power strips, amplifiers, processors, mixers, powered speakers, laptops, chargers, and lighting fixtures all show up on a gig with different plug types. Keeping a handful of these adapters in the kit means an IEC feed can power an Edison device without a trip to the truck. Mobile DJs, AV integrators, house techs, and touring crews all run into this exact mismatch, usually at the worst possible time.

Buy It by the Handful
Adapters walk off. They get left in venues, tossed in the wrong case, and borrowed by the opener. The XC-PEIEC is priced so you can stock spares in every road case and still have a few in the drawer at the shop.

Key Features

• Edison Female to IEC C14 Male — Converts IEC C14 style power cables into Edison style power cable extensions
• 110V Rated — Built for standard 110V power applications
• 18 AWG Conductor — Matches the gauge used in common IEC power cabling
• Molded Strain Relief — Built directly into both connector bodies for long term durability
• 1 Ft. Length — Adds the connection without adding slack to manage
• Compact and Portable — Fits in a gig bag pocket, rack drawer, or case accessory tray
• Rack, Booth, and Stage Applications — Works with power strips, amplifiers, processors, mixers, powered speakers, laptops, and lighting fixtures
• Affordable Spare — Priced to stock multiples across every case and rack
• ProX Limited Warranty

Configuration: Edison female to IEC C14 male power adapter cord Length: 1 ft. Conductor: 18 AWG Rating: 110V Strain Relief: Molded into both connector bodies Warranty: ProX Limited Warranty UPC: 019372408390 Shipping Dimensions: 1.00"H x 1.00"W x 5.00"L Shipping Weight: 0.50 lbs

1x ProX 18 AWG Power Adapter Cord Edison Female to IEC Male