ProX 14 Ft Heavy-duty Lighting Crank Stand for Lifting Truss 220 lbs Capacity Incl 5ft T-Bar

Featuring the ProX XT-CRANK14FT-220, a heavy-duty lighting crank stand built for serious production work. When you are setting up a DJ event, a live performance, or a club installation and need to get lighting and truss up fast without a crew of people to do the lifting, this is the stand that gets it done. It reaches a full 14 ft. in height and handles up to 220 lbs. of load capacity, giving you the headroom and strength to support real production setups. This is the kind of stand that mobile DJs, production companies, and touring acts rely on when performance cannot be compromised.

Heavy-Duty Winch Mechanism The cranking system is built to handle the work. Turning the winch clockwise raises the tower smoothly, and reversing it lowers just as easily. There is no need to physically lift heavy fixtures or truss runs overhead. The winch does the work, keeping your setup safe and consistent every time.

Steel and Aluminum All-Metal Construction The stand is built entirely from metal components, combining the strength of steel with the lighter weight characteristics of aluminum. This is not a stand that flexes or wobbles under load. It is built to hold its position and give you confidence once your rig is in the air.

Included 5 ft. T-Bar A 5 ft. T-bar is included with the stand, giving you an immediate horizontal mounting surface for fixtures right out of the box. This is a practical addition that saves you from having to source a bar separately before your first show.

Integrated Casters Built-in casters make moving the stand across a venue straightforward. You can roll it into position without dragging or fully breaking it down, which matters when you are working a quick changeover or managing a tight setup window.

Individually Adjustable Leg Braces with Nylon Guided Leg Sliders The legs adjust individually to account for uneven surfaces, and the nylon guided sliders help keep the leg movement smooth and controlled. This gives you a stable, level base even when the floor is not perfect.

Compatible with ProX Truss and T-Adapters ProX CRANK14FT-220 is designed to work with matching ProX stands, trusses, and T-adapters, which are available separately. If you are building out a full truss system, this stand integrates cleanly with the rest of the ProX XT truss ecosystem.

TUV Certified The stand carries TUV certification, an independent safety verification that the product has been tested and meets established safety standards. This matters when you are working in venues that require documentation or when safety inspectors are on site.

Specs at a Glance Maximum vertical load capacity is 220 lbs. The base footprint spans 63" (5.25 ft.) in diameter. Overall unit weight is 46 lbs. Shipping dimensions are 9" H x 11" W x 69" L at 63 lbs. The stand folds down for transport and storage.

Important Safety Note A qualified person should inspect all rigging hardware, stands, and equipment before each use. Loads must be centered and balanced on each lifting unit. Safety chains must be installed on every item attached to the stand. Do not attempt to move the stand while it is loaded or in the extended position. Always refer to the full safety manual included with this product and observe all usage instructions.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XT-CRANK14FT-220 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• 220 lbs. maximum vertical load capacity for heavy production lighting and truss rigs
• Reaches up to 14 ft. in height, ideal for DJ events, live performances, and club installations
• Heavy-duty winch mechanism raises and lowers loads smoothly without manual lifting
• Includes a 5 ft. T-bar for immediate horizontal fixture mounting right out of the box
• TUV Certified for independently verified safety compliance
• All-metal construction combining steel and aluminum for strength and durability
• Integrated casters for easy repositioning across venue floors
• Individually adjustable leg braces with nylon guided leg sliders for stable setup on uneven surfaces
• 63" (5.25 ft.) base diameter provides a wide, stable footprint under load
• Compatible with ProX XT truss segments, stands, and T-adapters (available separately)
• Folds down for transport and storage
• Unit weight: 46 lbs.

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.