ProX LED Video Display Panel Ground Support System Package 5M/16.40FT Width x 2.0M/6.56FT Height in Black

Featuring the ProX XTP-GSLED5X200BLK LED Video Display Panel Ground Support System Package, this is the complete, no-overhead-rigging solution for professional LED video wall installations that need to go up fast, stay solid, and look clean on any stage or production floor. Spanning 16.40 ft (5M) wide by 6.56 ft (2.0M) high, this package gives production crews, rental houses, and event companies a proven freestanding structure purpose-built for ground-stacked LED panel walls. Whether you are setting up for a corporate event, a touring concert, a trade show, or a broadcast environment, the ProX XTP-GSLED5X200BLK delivers a professional-grade foundation without the overhead rigging, without the complexity, and without wasted time on set.

Why Ground Support Matters Live production moves fast, and overhead rigging is not always an option. Ground-supported LED walls solve that problem by putting the structure at floor level, making assembly faster, safer, and accessible to smaller crews. This package is specifically engineered to make that process as clean and efficient as possible, with components that fit together logically and deploy without unnecessary steps.

Foundation: XT-GSWSB MK2 Stabilizing T-Base The package includes five XT-GSWSB MK2 Ground Support Stabilizing T-Bases, and these are what make the whole system work. The compact T-Base design takes up far less storage and cargo space than traditional ground support stands, which matters when you are managing touring inventory or working with limited vehicle space. Each base is designed to support one vertical F32 I-Beam truss segment at its center and is suitable for supporting up to two vertical columns of 500 x 500 mm LED panels, subject to panel weight, wall height, ballast, and professional engineering approval. The result is a stable, low-profile base that gets your structure up quickly without taking over the floor.

Vertical Structure: XT-F32LB820BLK F32 I-Beam Linear Truss Five black F32 I-Beam linear truss segments, each measuring 8.20 ft (2.50M), form the vertical backbone of the ProX XTP-GSLED5X200BLK. The F32 I-Beam profile is a trusted standard in professional LED wall installations, offering strong vertical support with a clean look that integrates naturally into all-black production rigs. The black powder coat finish keeps the hardware low-visibility on stage and behind LED panels.

Panel Alignment: XT-TC5LEDPABLK Mounting Plates Twenty black LED panel wall mounting plates with adjustable 10" to 13" telescoping offset clamps are included to handle precise panel alignment. These plates are engineered to work with the XT-GSWSB T-Base and are sized for standard 500 x 500 mm or 500 x 1000 mm LED panels. The telescoping offset allows you to dial in the exact positioning from the support column so every vertical panel column sits straight and consistent. Each mounting plate supports two vertical columns of 500 mm wide LED panels, giving you the flexibility to scale configurations cleanly.

All-Black Finish Every component in this package ships in a matching black finish. On stage and behind LED content, hardware disappears, and that is exactly what professional productions require. The sleek, uniform look blends into any backdrop, stage deck, or production environment without drawing attention away from the display itself.

Important: Ballast Is Not Included Proper ballast is required for safe operation of any ground-supported LED wall system. Ballast is not included in this package. You must consult a qualified engineer or production professional to determine the correct ballast weight for your specific panel configuration, wall height, and installation environment. ProX recommends using ballast weight equal to the total installed LED panel weight as a baseline, and sandbags or steel ballast weights are common solutions depending on venue requirements. All installations must comply with local codes, venue requirements, and engineering standards. For outdoor use, a qualified structural professional must review and approve the installation prior to setup, as wind loads and environmental conditions significantly affect stability and safety.

Note: LED panels are not included with this package.

Package Contents This system includes (5) XT-GSWSB MK2 Ground Support Stabilizing T-Bases, (5) XT-F32LB820BLK 8.20 ft F32 I-Beam Linear Truss Segments in Black, and (20) XT-TC5LEDPABLK Black 10"–13" LED Panel Wall Mounting Plates.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XTP-GSLED5X200BLK is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Complete Ground Support Package Includes everything needed to build a freestanding 5M (16.40 ft) wide x 2.0M (6.56 ft) high LED video wall structure without overhead rigging
• (5) XT-GSWSB MK2 Stabilizing T-Bases Compact T-Base design takes up significantly less floor and cargo space than traditional ground support stands
• (5) XT-F32LB820BLK F32 I-Beam Linear Truss Segments 8.20 ft (2.50M) black F32 I-Beam truss sections form the vertical backbone of the system
• (20) XT-TC5LEDPABLK LED Panel Mounting Plates Adjustable 10" to 13" telescoping offset clamps allow precise panel alignment per vertical column
• Compatible with Standard LED Panel Sizes Designed for 500 x 500 mm and 500 x 1000 mm LED panels
• Freestanding Structure No overhead rigging required; suitable for venues, stages, and events where flying is not an option
• All-Black Finish Every component ships in a matching black finish so hardware stays low-visibility behind and around LED content
• Fast Assembly Components are designed to connect logically for faster deployment with smaller crews
• Ballast Required (Not Included) Safe operation requires proper ballast weight equal to or greater than total installed panel weight; consult a qualified engineer before use
• LED Panels Not Included This package covers the structural support system only

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.